4.5.4. Output and global controls
The output level is controlled by the Output Trim controls (potentiometers).
We also have some global controls switches which affect the plug-in behavior globally.
Those are the already mentioned Equalizer On/Off switch, the Phase switch (which inverts
the signal phase when lighted), and, probably the most important ones, the Stereo Link and
Stereo Mode switches.
These ones are only present when we are using the Double Channel configuration, and it's
with them that we choose between the three modes we can use in that configuration.
We have two switches for this: The first one is to activate/deactivate Stereo Link. The second
one is labeled Stereo Mode, and switches between L/R and M/S.
With these two switches, we can choose between the three modes the plug-in works on
when in Double Channel configuration: Stereo, Mid/Side or Dual Mono.
Stereo mode is achieved only if the Stereo Link button is On and we have the second
switch in L/R (Left/Right) position. In this mode, any changes we make to one channel are
reproduced in the other channel as well.
If we switch the Stereo Link to the Off position, we enter the Dual Mono mode. In this mode,
each channel works independently, as if we had two mono channels.
There is a third mode that is activated by changing the Stereo Mode switch to the M/S
position. This mode is called Mid/Side, and in this mode, although we are still in Stereo,
the channels work in a way that is completely different than the traditional Left/Right way.
For this mode each channel has to be independent, which is why the Stereo Link button is
automatically switched Off when we select M/S.
Arturia - User Manual V76-Pre - V76-Pre OVERVIEW
23
Содержание V76-Pre
Страница 1: ...USER MANUAL ...