Arturia V76-Pre, Руководство пользователя

Страница: 19 / 41

3.3.3. Relative Control option
The final option in this window is a button labeled “Is Relative”. It is optimized for use with
a specific type of control: one which sends only a few values to indicate the direction and
speed at which a dial is turning, as opposed to sending a full range of values in a linear
fashion (0-127, for example).
To be specific, a “relative” dial will send values 61-63 when turned in a negative direction and
values 65-67 when turned in a positive direction. The turn speed determines the parameter
response. Refer to the documentation of your hardware controller to see if it has this
capability. If so, be sure to switch this parameter on when setting up its MIDI assignments.
When configured this way, movements of the physical control (usually a dial) will change
the software parameter by starting at its current setting, rather than being an “absolute”
control and snapping it to some other value as soon as you start to move it.
This can be a great feature when controlling things like volume, filter, or effect controls since
you won’t usually want them to jump noticeably from their current setting when they are
modified.

♪
: Pitch Bend, Mod Wheel and Aftertouch are reserved MIDI controllers that cannot be assigned to
other controls.
3.4. MIDI controller configuration
There’s a small arrow at the far right-hand side of the toolbar (after the MIDI icon) that
deals with MIDI controller configurations. This allows you to manage the different sets
of MIDI maps you may have set up for controlling the instrument’s parameters from
MIDI hardware. You can copy the current MIDI assignment setup or delete it, import a
configuration file or export the currently active one.
This is a quick way to set up different hardware MIDI keyboards or controllers with V76-Pre
without having to build all the assignments from scratch each time you swap hardware.
Note the check mark on the bottom of the menu: that indicates that the configuration with
that name is the one currently active. Empty means that there's no configuration loaded.
Arturia - User Manual V76-Pre - USER INTERFACE 15