background image

3.2.4. Export Menu

You can export presets in two ways: as a single preset, and as a bank.

Export Single Preset:

Exporting a single preset is handy when you want to share

a preset with someone else. The default path to these files will appear in the

"save" window, but you can create a folder at another location if you like. The

saved preset can be reloaded with the import preset menu option.

Export Bank:

This option can be used to export an entire bank of sounds from the

instrument, which is useful for backing up or sharing presets.

3.2.5. Resize Window options

The V76-Pre window can be resized from 60% to 200% of its original size without any visual

artifacts. On a smaller screen such as a laptop, you might want to reduce the interface

size, so it doesn't dominate the display. On a larger screen or a second monitor, you can

increase the size to get a better view of the controls. The controls work the same at any

zoom level, but they can be harder to see at the smaller magnification values, or when using

high resolution monitors (like HD monitors or higher). The higher the resolution, the bigger

the size that should be used.

3.2.6. Preset Selection

The Preset browser [p.17]

can be opened by clicking the library symbol on the toolbar. The

filter, name field and left / right arrows in the toolbar all assist with preset selection.

Arturia - User Manual V76-Pre - USER INTERFACE

13

Содержание V76-Pre










































Отзывы: