Arturia beatstep pro, Руководство пользователя

Страница: 19 / 93

ARTURIA – BeatStep Pro – USER’S MANUAL 19
2.3 Rear panel overview, part 1
2.3.1 Pitch/Velo/Gate outputs
These are normally used together to send electrical signals to an external device such as
Arturia’s powerhouse monophonic analog synthesizers (MiniBrute/SE and MicroBrute/SE)
or to a modular analog synthesizer. The Pitch output is often referred to as Control
Voltage or CV.
2.3.2 Drum gates
These outputs correspond to pads 1-8 when the Drum sequencer is selected. When these
pads are played manually or as part of a pattern they will send trigger pulses to the
Drum gate outputs, which in turn can be used to trigger a sound on an external device.
Note: Only the Gate on/off signals are transmitted for pads 1-8 from these connectors.
In contrast, the MIDI connector sends Velocity and Gate Time information to all 16 pads.
Read more about the Drum Gates in
section 9.2 .
2.4 Rear panel overview, part 2
2.4.1 Clock input/output
The included DIN adapter (1/8” TRS jack to 5-pin DIN, black) allows BeatStep Pro to
interface with pre-MIDI technology that used these connectors for synchronization, such
as early drum machines by Korg and Roland.
You can use the standard clock implementation on TRS jack with clock and state signal
or a TS jack with only clock signals.
2.4.2 MIDI input/output
Use the included MIDI adapters (1/8” TRS jack to 5-pin DIN, gray) to send control
signals of all sorts to external MIDI-compatible devices. Each of BeatStep Pro’s encoders,
buttons and pads can be configured independently to send specific MIDI data.