ARTURIA – ANALOG FACTORY 2.0 / EXPERIENCE. - MANUAL
28
CutOff
: modifies the cut-off frequency (this filter has the ability to make
the sound more or less bright by controlling the amount of high
frequencies)
Resonance
:
(RESO)
modifies the resonance of the filter (the sound becomes
more “cutting” when the parameter is pushed)
3.4.4
LFO
The LFO, Low Frequency Oscillator, is used as a modulation source for Analog Factory 2.0’s
sound. It allows the user to create variations in a sound parameter to generate diverse
effects such as a vibrato, “wahwah” effect, etc. The two parameters that may be modulated
within the LFO are:
LFO
Rate
: knob setting the LFO rate/speed
Amount
: knob setting for the amount of LFO modulation
3.4.5
Key Parameters
The key parameters section will prove to be particularly useful. This section is found in the
middle of the
Keyboard View
and labelled with the aforementioned name (
Key Parameters)
.
Key Parameters
Each preset offers the four most pertinent parameters unique to that preset. Our sound
designers have taken the greatest care to assign parameters that will enrich and give depth
to the sound of each preset. In this way, only the parameters that are the most beneficial
when modifying/tweaking a given sound are available, facilitating the production process.
To know which 4 parameters have been selected for each preset, one must simply point the
mouse over a Key Parameter knob and an information block will appear specifying the
parameter name.
