ARTURIA – ANALOG FACTORY 2.0 / EXPERIENCE. - MANUAL
16
Choice of installation disc
Analog Factory will automatically install as a standalone application (functioning
independently and apart from any sequencer host). In the same way, all the available
protocols (VST, Audio Unit and RTAS/HTDM) will be installed. For more information on
these protocols, go to chapter 4.
Next, the installation program proceeds with installation of the Syncrosoft code and License
Control Center. In order to do this, it will execute the available Syncrosoft installer on the
CD-Rom. Follow the instructions of the installer.
The standalone application will be installed in the applications folder, and the different plug-
ins will be installed in folders reserved to each type of plug-in.
2.4
Syncrosoft software activation code installation for Analog Factory 2.0
The Analog Factory 2.0 software is protected from illegal use and copying thanks to the
Syncrosoft system.
At the time of the activation, a license corresponding to your computer will be assigned to
you and will be stocked on your computer.
Important Note:
Once the licence is installed on your computer, it will not be possible to use Analog Factory on other
computers. Please make sure to do the activation on the computer you prefer to Analog Factory 2.0
on.
In case you need to use Analog Factory 2.0 on different computers, transfer your software code on an
USB Syncrosoft key. However, this feature will be available December 2007 only. To purchase a
Syncrosoft USB key, also known as e-licenser, please visit www.arturia.com and to go the online
store.
On Windows
You will find this application in « Start » menu > Programs > Syncrosoft > Syncrosoft
License Control Center.
On Mac OS X
