Art's-Way Manufacturing 660800, Руководство оператора

Страница: 37 / 48

Art’s-Way Manufacturing Co., Inc.. Manual No. 660885
SECTION 2: SOFTWARE AND OPERATION 35
Selecting the Art’s Way tab will open the Depth and Leveling Control system. A brief screen
showing the Art’s Way logo will appear, followed by the system home screen shown above. At this
time, uncheck the boxes for Auto Depth Control and Auto Level Control. Use the tractor SCV Valve
to raise the front of the unit to full height. Engage the tractor SCV valve used to run the Rowfinder
and set flow to 50%, this will provide hydraulic pressure to the Leveling/Depth Control manifold.
If there are cylinder stops installed on the hitch cylinders, remove those now. If the cylinder stop
is installed on the leveling axle it should also be removed. To extend the leveling axle cylinder,
touch softkey “I”. If after 2 or 3 attempts to extend the cylinder it hasn’t moved, attempt to extend
the cylinder using softkey “D”. Once the cylinder is extended, remove the cylinder stop and store
on it on the axle support arm.