Art's-Way Manufacturing 660800, Руководство оператора

Страница: 27 / 48

Art’s-Way Manufacturing Co., Inc.. Manual No. 660885
SECTION 1: parts & installation 25
HYDRAULIC INSTALLATION
CONNECT TO TEE FITTING AT
ROD END OF LH HITCH CYLINDER
CONNECT TO TEE FITTING AT
BASE END OF LH HITCH CYLINDER
CONNECT TO PORT "A1"
ON DEPTH CONTROL MANIFOLD
CONNECT TO PORT "B1"
ON DEPTH CONTROL MANIFOLD
1
PRE-6812-D PRODUCTION
ITEM NO. PART NUMBER DESCRIPTION
1 562850P FITTING, HYD TEE 2
DRAWING NO.
660800
660800
XX
1:2
LISTED
N. WHITMAN
-
E.C.N. DATE APPR DESCRIPTION LTR
MATERIAL
REV.
EP#
REVISIONS
DRAWN
CHK
APPR
-
MACHINING DRAWINGS: REMOVE
ALL BURRS & SHARP EDGES.
MODEL NOTE: DO NOT SCALE
EXCEPT AS MAY BE OTHERWISE PROVIDED BY
CONTRACT. THESE DRAWINGS AND SPECIFI-
CATIONS ARE THE PROPERTY OF ARTS-WAY
MFG. CO., ARE ISSUED IN STRICT CONFIDENCE,
AND SHALL NOT BE REPRODUCED OR COPIED,
OR USED AS THE BASIS FOR THE MANUFACTURE
OR SALE OF APPARATUS WITHOUT PERMISSION.
TITLE
DATE
SCALE
DRAWING NO. SIZE
D
Art's-Way Manufacturing Co., Inc.
Phone: (712) 864-3131
Fax: (712) 864-3154
Armstrong, Iowa 50514-0288
±.010
±.O30
±.060
(.XXX)
(.XX)
(.X)
ANGLES ± 1°
THREE PLACE
TWO PLACE
ONE PLACE
DIMENSIONS ARE IN INCHES
UNLESS OTHERWISE SPECIFIED
-
-
NEW MODEL ON SOLIDWORKS - NRW
4892.18 WEIGHT
SIMILAR PART(S):
06/12/20
07/03/18
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 562850P FITTING, HYD TEE 2
INSTALLING HITCH CYLINDER HYDRAULICS ON PRE-6812-D UNITS
On harvesters built prior to the 6812-D model, the two hitch cylinders are plumbed in parallel.
From the tractor, hoses are connected to Tee fittings connected directly to the hitch cylinders (could be
left or right). From the Tee fittings, short hoses connect the left to right cylinder. Disconnect the short
hoses from the cylinder without the Tee fittings. Removed the straight fittings from the cylinder and
install two additional Tee fittings (provided). Reconnect the short hoses to the new Tee fittings. From
the remaining ports on the new Tee fittings, connect 64” -8 hoses (p/n 660154). Connect the hose from
the base of the hydraulic cylinders to the “B1” port on the depth control manifold. Connect the hose
from the rod end of the hydraulic cylinders to the “A1” port on the depth control manifold.
CONNECT TO TEE FITTING AT
ROD END OF LH HITCH CYLINDER
CONNECT TO TEE FITTING AT
BASE END OF LH HITCH CYLINDER
CONNECT TO PORT "A1"
ON DEPTH CONTROL MANIFOLD
CONNECT TO PORT "B1"
ON DEPTH CONTROL MANIFOLD
1
PRE-6812-D PRODUCTION
ITEM NO. PART NUMBER DESCRIPTION
1 562850P FITTING, HYD TEE 2
DRAWING NO.
660800
660800
XX
1:2
LISTED
N. WHITMAN
-
E.C.N. DATE APPR DESCRIPTION LTR
MATERIAL
REV.
EP#
REVISIONS
DRAWN
CHK
APPR
-
MACHINING DRAWINGS: REMOVE
ALL BURRS & SHARP EDGES.
MODEL NOTE: DO NOT SCALE
EXCEPT AS MAY BE OTHERWISE PROVIDED BY
CONTRACT. THESE DRAWINGS AND SPECIFI-
CATIONS ARE THE PROPERTY OF ARTS-WAY
MFG. CO., ARE ISSUED IN STRICT CONFIDENCE,
AND SHALL NOT BE REPRODUCED OR COPIED,
OR USED AS THE BASIS FOR THE MANUFACTURE
OR SALE OF APPARATUS WITHOUT PERMISSION.
TITLE
DATE
SCALE
DRAWING NO.
SIZE
D
Art's-Way Manufacturing Co., Inc.
Phone: (712) 864-3131
Fax: (712) 864-3154
Armstrong, Iowa 50514-0288
±.010
±.O30
±.060
(.XXX)
(.XX)
(.X)
ANGLES ± 1°
THREE PLACE
TWO PLACE
ONE PLACE
DIMENSIONS ARE IN INCHES
UNLESS OTHERWISE SPECIFIED
-
-
NEW MODEL ON SOLIDWORKS - NRW
4892.18 WEIGHT
SIMILAR PART(S):
06/12/20
07/03/18