Artos CS-327, Руководство пользователя, Страница: 27 / 133

27
If this box is checked the cut blade will fully retract before the wire feed begins. This allows
more space for the wire to get in between the blades. Because we are waiting for the blade to
retract, checking this box will reduce the machine parts per hour.
FILE MANAGEMENT
CREATING AND EDITING PARTS
The complete wire file that consists of wire name, wire overall length, strip length, strip stroke and pre
and post process information is called a “PART”. Click on the
PART icon to open the “Parts properties”
window to create a part.
Click on
New
and enter the part identification name in the window. All the information that is
currently on the screen will be associated to that name and saved to it when you click the “File Save”
icon.
CREATING AND EDITING JOB PROGRAMS
The CS327 can be programmed to run a Job Program. This is a series of existing part programs run either
in a batch or harness.
A maximum of 500 parts can be entered on a job list. There are two modes to
run the machine, Batch and Harness, both are described below.
Batch Mode will produce all the parts programmed in the total quantity of a part program in the batch
sizes desired and will then change to the next programmed part. The quantities of wires to be produced
can be pre-programmed in the job list or they can be entered at run time. If you want to pre-program the
number of wires to be produced simply enter the Total number and Batch number on the list. When you
start to run a job program in the software you will be given the following message. Make sure the
Program multiplier is set for 1 and click the green check to use the pre-programmed quantities.