Figure 7 page of DMX Address
2.
Set Light work mode
Enter the page of ‘WORK MOD’ as shown in Figure 8 and modify setting. Can set
light work mode, control lamp and DMX channel mode..
Light includes 3 work mode: DMX MODE, AUTO RUN and SOUND MODE,
Parameter definition as following:
DMX Mode
：
Under this mode, the light receive data from the DMX controller
and move.
AUTO RUN
：
Under this mode, light will run with inside code(data), ignore data
from DMX controller.
SOUND Ctrl
：
Under this mode, light ignore data from DMX controller., When
there is a strong sound in stage, the light will run a scene, otherwise it will keep
the last scene.
M/S Choose
：
’M/S Choose’ is available when light just in ‘AUTO RUN’ or
‘SOUND Ctrl’ mode. If this item is set as ‘OFF’, the light don’t send data to other
light via DMX Cable. When ‘ON’, the data will send to other slave light
immediately.
Lamp control
：
Turn on lamp when this item is set ‘ON’, otherwise, turn off lamp.
The gap between operation is limited to 30 second.
Channel mode
：
Light support 2 DMX Channel mode: sample or extend
。
Figure 8 page of work mode
