Figure 10 page of Test
5.
Set light run parameter
Enter the page as shown in Figure 10, set the parameter of light:
Pan Invert: Reverse PAN move.
Tilt Invert: Reverse TILT mover.
Rectify enable
：
set as ‘OFF’, PAN or TILT will disable position rectify function.
As ‘ON’, when PAN or TILT lose steps, light will rectify auto.
Pan Offset: Set PAN original position.
Tilt Offset: Set TILT original position.
Lamp up when: Select lamp on mode, includes 3 mode: power on, after reset
done and manual
；
Factory setting: restore all parameter to factory setting.
Figure 11 page of run parameter
6.
View status
Enter the page as shown in Figure 12:
