Figure 5 Dialog of confirm
4.
Sub Menu
（
Parameter
）
Chick item of main menu, enter corresponding sub menu, shown in Figure 6, total 6
sub menu, includes class of parameter and status:
ADDRESS
：
Set light DMX address.
WORKMOD
：
Set light work mode, master or slave mode when in auto run mode.
DISPLAY
：
Set display parameter, eg. select language.
TEST
：
Used for test light, modify DMX channel data to test function
，
the
corresponding function of reference channel function table.
ADVANCE
：
Set light running parameter.
STATUS
：
view light current status.
Figure 6Parameter menu
3.
Operation and parameter instruction
Via following operation, enter sub menu(parameter menu) shown in Figure 6
In main menu, chick 1/6 function button into corresponding parameter menu.
In sub menu(page), chick main item on the left side of displayer, can shift to
corresponding sub menu(page) quickly.
1.
Set DMX Address
Click and select the "ADDR", can enter the page of DMX address setting, range from
1 to 512, the address code shouldn’t is not greater than (512- channels quantity),
otherwise the light will not been controlled. Following is the operation:
Enter the page of DMX address, as shown in Figure 7, click the blank area in right
side of display will pop-up diglog as in Fig. 4, modify value, then click ‘ENTER’ to
confirm and save DMX address code.
