ArtFox Vista 16R Extreme, Руководство пользователя

Страница: 4 / 15


Tilt scan
：
270° (16bit) Electric correction

Amazing dot matix, four tact switch, 180° turning show

Color wheel: one color wheel, 13 kinds of color chips in one color wheel

Gobo: 13 static gobos, 9 rotation gobos;

Effect Wheel: Rotation eight prism, effect move , frost
0-100% mechanical dimming, mechanical dimming and free dimming available.

strobe macro control available.

Lens optical system achanical fouce .beam angle 0
～
4°

Over heat protection

Power Input: 100-240V
，
50/60Hz

Power Dissipation
：
450W

IP level :IP20

Magnetic ballast and AC/Dc power supply
5. Cable connection
（
DMX
）

Use a cable conforming to specifications EIA RS-485: 2-pole twisted, shielded,
120Ohm characteristic impedance, 22-24 AWG, low capacity. Do not use
microphone cable or other cable with characteristics differing from those
specified. The end connections must be made using XLR type 3 or 5-pin
male/female connectors. A terminating plug must be inserted into the last
projector with a resistance of 120Ohm (minimum 1/4 W) between terminals 2
and 3.

IMPORTANT: The wires must not make contact with each other or with the
metal casing of the connectors. The casing itself must be connected to the shield
braid and to pin 1 of the connectors.
Figure 1 DMX Cable connection