4.1 RFID card
◆
Why we have to use safety card before use ?
To avoid damage to the machine caused by powders
not suitable for the machine.PLEASE USE OUR
POWDER ONLY!
To avoid the accident that may cause by unauthorized person or
children by mistake.
Please keep the card for the right person only.
◆
Where you can find the card and How to use it
？
The safety card is packaged together with our powders ,Each bag of
powder should have one card .
Tap the Card to the Induction zone to activate the device. Each card
enables the unit to work 20 minutes(that’s almost the using time for
one bag powder ). In the meantime, the card will be invalid after being
read one time.
◆
How to check the remaining time
？
Press “Menu” buttons till the page “Time” to check the remaining time
(minutes ) of using. Tap another new card to re-activate the unit when
the time is over.
2.
Safety instructions
◆
Keep away from humidity, water and dust!
Avoid placing the device in a location with high
humidity or excessive dust.
◆
Place the device on a firmground!
To avoid vibrations always place the device on a firm ground.
◆
Do not use chemicals forcleaning!
Use a clean and dry cleaning rag to remove dust. Metal parts can be
cleaned with a damped cleaning rag. Before cleaning always unplug the
device from the power supply.
◆
If the device is not workingproperly!
If problems occur unplug the device from the power supply. The user
should not try to service the device independently. All repairs and
service must be performed by a qualifiedtechnician.
◆
Eye Protection
The eye protection warning icon is Shown to indicate that you must be
protect your eyes when close to the machine during machine operation.
◆
The safety distance to the audience must be 2meter
Never aim the nozzle on people and keep a distance from 1 meter to the
nozzle.Don't spray on the food.
◆
ATTENTION!
Damages caused by the disregard of this user manual are not subject to
warranty. The dealer will not accept liability for any consequent secondary
failures. Only skilled workers are allowed to carry out the electrical
connections. All electrical and mechanical connections have to be carried
out according to the European safety standards.
The powder should not be exposed to the air. If a bag of powder is not
used up, it should be kept in a sealed condition and not exposed to open
fire.
NOTES:machine must be vertical if has powder in the tank.Must
take out all powder when machine shipped.
5
2
Содержание SparkX
Страница 5: ......
