3
.
5
3.
Technical data
Wireless RF Controllers
--------
W-3 Receiver/Dip
W-8 Usage Instructions
：
◆
When machine ready to spark out, the ready led will glow .There are 3
Channels(Dip 1-3) can be selected forgroup-1,group-2,group-3
1 - spark
2 - close or stop
3 -lasts 10 seconds.
5 - lasts 20seconds.
7 - lasts 30seconds.
4 - group 1 spark (Receiver = 1)
6 - group 2 spark (Receiver=2)
8 - group 3 spark (Receiver=3)
Wired Remote X-2 controller:
◆
When the heating process is finished, the green light lights up and indicates
that the button on the remote control can be pressed. If heating is not
complete, the green light does not light up then the remote control cannot be
operated.
Specification
◆
3
4.
Operation
Before using
：
◆
Never stand directly below the device when it isbeing
mounted, removed or serviced.Have a qualifiedtechnician
check the device annually and additionally before placing into service if
stored for an extended period of time.
◆
Install the device in a secure location that is inaccessible to
unauthorized persons.This machine can only be used byadults.
◆
Make sure there is no flammable material within a 10ft radius of the
device.There can be no objects blocking the use of themachine.
◆
Be sure that the local power outlet match that or the required voltage
for your machine.
◆
Can not join any flammable liquid, such as oil andgas.
◆
Be sure the lid is well covered before use the machine,
or the spark will splash
out.
Usage method
◆
Place the unit on a flat,dry surface. The machine can be inverted, but
can not be sidelong, please pay attention to keep upright. Otherwise the
spark will not be vertical and probably make the machinedamaged.
◆
fill the powder reservoir with our powder only then tighten the cap.
◆
Scan the safety card before use (for more details about powder and Safety
card please check 4.1)
◆
The device starts to heat up. This process needs 5 minutes,meanwhile
the display shows “UP”.
◆
The heating process is finished. The display shows“READ“
1.
Menu button
：
press enter the menu and setting
data
，
more or less can be adjusted
2.
Addr can setting DMX512 addr
：
min 1
，
max
512
；
3.
Fan
：
min is 10%
，
max is 100%
，
10% for 1 step
4.Time: show the machine left time
，
unit issecond
4
Rated voltage
AC220V/50Hz/AC120V/60Hz
Rated power
500 W
fuse
10 A 5 A
Pre-heating time
<8 min
Spark max height
1-4M
Spark height change
support
Wireless controller
W-8
Display screen
Digital display board
DMX
support
DMX channel
1
DMX range
1-512
Net weight
6.6 Kg
Gross weight
7.5 Kg
Machine size
190*190*260 mm
Carton size
260*260*310 mm
Содержание SparkX
Страница 5: ......
