Artesyn Embedded Technology SharpStreamer PCIE-7207, Инструкция по установке и эксплуатации

Страница: 94 / 118

Utilities and Applications
SharpStreamer™ PCIE-7207 Installation and Use (6806800T60F )
94
– Power Cycle all CPUs in all PCIE-7207s in the system
# pci7207 –cp

Execute BIOS Crisis Recovery for a PCIE-7207 CPU.
Executing a BIOS Crisis Recovery for a PCIE-7207 CPU requires a MicroSD card to be
inserted in the MicroSD slot for the PCIE-7207 CPU. The MicroSD card needs to contain the
BIOS image to be installed, the image with the BIOS only region, and needs to have the
name
pcie7207Pkg.fd
. The BIOS recovery procedure takes several minutes to
complete and the user should wait until the procedure completes before performing any
other actions on the board.
# pci7207 -s1 -n1 –ce
===== WARNING: BIOS Crisis Recovery for Card 1 CPU 1 Selected
=====
Did you insert a uSD card with the BIOS Crisis Recovery Image in
the CPU uSD Slot?
Enter Y/N:
Y
Starting BIOS Crisis Recovery for Card 1, CPU 1
................................................
BIOS Crisis Recovery Complete, Power Cycling Card 1, CPU 1

Obtain sensor information from a PCIE-7207 CPU.
# pci7207 -s1 -n2 -ct
Warning: Permanently added '172.20.12.100' (ECDSA) to the list
of known hosts.
root@172.20.12.100's password:
Card 1 CPU 2: Core0: +31.0°C Core1: +31.0°C Power: 0.73W SPD1:
+29.50C SPD2: +29.00C
Each MCP has a power sensor. The utility outputs the reading from the sensor for the
MCP. When the system is idle the power is low and when it is running transcodes, the
power reading will be much higher.
The output from the utility shown in the manual is when the system is in idle condition.
SPD1 and SPD2 sensors are located near the memory banks. See Figure 3-2 on page 41 to
view the location of all the MCPs.