Artesyn Embedded Technology SharpStreamer PCIE-7207, Инструкция по установке и эксплуатации

Страница: 82 / 118

Software Installation
SharpStreamer™ PCIE-7207 Installation and Use (6806800T60F )
82
6.3.1 Network Interfaces
The
pci7207
utility used to initialize the network interfaces creates an internal network with
separate subnets for each PCIE-7207 Ethernet interface. The
pci7207
utility finds all the PCIE-
7207 cards in the system and assigns them a CARD ID to each one based on their PCI bus. It
then uses the CARD ID and CPU number to create the separate subnets as,
172.20.<card
id><cpu>.1 for the PCIE-7207 Host Ethernet interface, and 172.20.<card id><cpu>.100 for the
corresponding PCIE-7207 CPU Ethernet interface.
For example, a host system with three (3) PCIE-7207 cards installed would have an internal
network similar to details provided in the following table.
Table 6-1 PCIE-7207 Card Subnet Configuration
Card CPU Local IP (Host) 7207 CPU IP
1 1 172.20.11.1 172.20.11.100
1 2 172.20.12.1 172.20.12.100
1 3 172.20.13.1 172.20.13.100
1 4 172.20.14.1 172.20.14.100
2 1 172.20.21.1 172.20.21.100
2 2 172.20.22.1 172.20.22.100
2 3 172.20.23.1 172.20.23.100
2 4 172.20.24.1 172.20.24.100
3 1 172.20.31.1 172.20.31.100
3 2 172.20.32.1 172.20.32.100
3 3 172.20.33.1 172.20.33.100
3 4 172.20.34.1 172.20.34.100
T o use a different network configuration, you can modify the DHCP configuration file
/etc/dhcp/dhcpd.conf and initialize the local Ethernet interfaces accordingly.