Artemis Vision RaPTr Скачать руководство пользователя страница 9

Страница: 9 / 18

Artemis Vision RaPTr (Rapid Pallet Tracker) | System Set-Up Guide

REQUIREMENTS AND RECOMMENDATIONS

Barcode Requirements:

RaPTr is most effective with 2D barcodes (Data Matrix) with a minimum module size of

4mm. See below for a 14 x 14 datamatrix at the recommended module size of 4mm.

Other configurations are possible; contact Artemis Vision for details.

Lighting Recommendations:

The Artemis Vision system can automatically adjust the camera exposure in software,

but generally speaking, the more light the better. Low-light situations can affect scan

accuracy, and have an impact on the maximum speed the driver can be moving during

scanning. Artemis Vision recommends at least 300 Lux at the scanning face of the pallet.

This is about the equivalent of a well-lit office or retail environment. An inexpensive

light meter can help you determine if you need to add more light, but most warehouse

operations have adequate lighting due to standard safety requirements.

Additional Physical Location Recommendations:

For maximum efficiency and scanning success, Artemis Vision recommends placing

“guides” with tape or paint lines to demarcate the preferred drive path for forklift

operators as they approach the door. A simple line on the left and right to mark the Scan

Area, and two lines to designate the Scan Zone min and max area should suffice. Once

operators have become accustomed to these locations, it will become routine for them

to approach and slow down moderately for scanning to occur.

Содержание RaPTr


















