manualshive.com logo in svg

Artemis Vision RaPTr, Руководство по настройке системы, Страница: 15 / 18

Поделиться
Скачать
Artemis Vision RaPTr Скачать руководство пользователя страница 15

Artemis Vision RaPTr (Rapid Pallet Tracker)  |  System Set-Up Guide

12

field is left blank or the system cannot find this file, the system will play the default 

audible alarm sound.

Barcode is 2D

 – Check for 2D data matrix, uncheck for 1D.

Normalize Display Image

 – Check mark may enable an optimized image to be 

displayed to forklift driver. NOTE: checking this box will only impact the image on 

the main screen that the operator sees, and will not impact image used to read and 

decode barcode as set up in steps 1-9. 

Save Images Locally

 – Check to save all images in C:Artemis\images

Enable Heartbeat

 – For server, reference “Scanner Interfaces and Architecture” 

document.

Enable AutoStart

 – Check to automatically start barcode reading whenever the 

software starts up.

Upload Images to Server

 - Check to send images to the server. This is required to 

be able to view the images for any given barcode using the Web Reporting Tool (see 

Interfaces and Architectures Document).

Use Keyboard Mode

- Used in conjunction with Keyboard Wedge functionality (see 

Interfaces and Architectures Document)

Add Keyboard Carriage Return

 - Inserts a carriage return at the end of the string 

that is sent in Keyboard Mode and is used in conjunction with Keyboard Wedge 

functionality (see Interfaces and Architectures Document).

Audible Alarm

 – Check to enable the audible alarm. This alarm sounds when an 

incorrect pallet has been detected for the current order.

12. Follow the same procedure for

additional cameras, with the camera

aimed at the barcode positioned on

the bottom pallet (in a stack of 2).

13. When cameras are properly

configured, system will indicate

successful decoding of barcodes with

a green box highlighting where the

barcode image was found.

See image at right:

Содержание RaPTr



















Отзывы:

Нет отзывов