Artemis Vision RaPTr Скачать руководство пользователя страница 12

Страница: 12 / 18

Artemis Vision RaPTr (Rapid Pallet Tracker) | System Set-Up Guide

7. Adjust the Aperture on the lens (ring closest to camera). This allows more or less

light into the sensor. You may have to physically add more light to your selected

location.

8. Fine-tune the Focus (middle adjustment ring) so the image is crisp. When

complete, tighten all thumb screws.

9. View Module Width and Height to verify readability from the desired distance

(bar will display green; no color and values of 0 indicate nothing can be read).

If necessary, zoom in with the camera to achieve mininum pixels needed. Keep

in mind this will also affect the FOV. Verify appropriate Contrast, and if needed

adjust lighting. See below:

10. It may be necessary to go back and forth between steps 6 and 9 to achieve a

steady reading of the barcode in the image. This is indicated by a yellow box

around the image, and the actual decoded barcode information under the image.

Adjust until the yellow indicator and barcode info are steady and do not flicker.

See images:

Focus adjustment needed

No adjustments needed

Содержание RaPTr


















