manualshive.com logo in svg

Artel PCS 2, Руководство по процедурам

Поделиться
Скачать
Artel PCS 2 Скачать руководство пользователя страница 8

 

15A3356O 

4

 

2.3 

Cabling Procedures 

 

2.3.1

 

Connecting the Instrument to Power

 

 

The Instrument requires a three-prong electrical receptacle 
supplying single-phase power from 100-250 VAC, 50/60 Hz in 
which to plug the Power Supply. The same power source should be 
used for the Instrument and the Printer. This power line should be 
free from transients or voltage variations caused by other 
equipment such as water baths or refrigerators. 

 

Make sure that the Instrument Power Switch is off. Plug one end of 
the Power Cord into the Power Supply and the other end of the 
Power Cord into a grounded AC outlet. Insert the remaining plug 
into the power receptacle found at the rear of the Instrument. 

 

IMPORTANT

 

Ensure that all above connections are firmly in place.

 

 

2.3.2

 

Connecting the Seiko Printer to Power

 

 

NOTE:

 

If the STAR Dot Matrix Printer is being used, please refer to the STAR Printer 
User’s Manual for printer connection and operation. 

 

Plug the Printer AC adapter into an appropriate receptacle.  
Plug the remaining end of the adapter into the power receptacle 
located at the rear of the Printer. 

 

2.3.3

 

Connecting the Printer to the Instrument

 

 

Make sure the Instrument and Printer are turned off. Plug one end 
of the Printer cable into the Printer and the other into the 
Instrument.  

 

IMPORTANT

 

When the Instrument and Printer are connected, the Instrument must be powered on to 

operate the Printer.

 

 

2.4 

Seiko Printer 

 

2.4.1

 

Controls and Indicators:

 

 

Power Switch

. When slid to the ON position, power is supplied to 

the Printer and the POWER and ON LINE indicators illuminate. 
When there is no paper loaded, the OFF LINE indicator flashes. 

Содержание PCS 2





































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды