background image

4

Notice

Operating

Then plug cigarette into its socket in car (Adapter should be 
connected  if charge at home: connect the adapter  to home 

power socket, then plug the adapter' DC end to charger). The 
LED will turn green indicating it is ready for charging.                                                          

2. Connect the battery to charger per its interface mark. The LED 

becomes red, which means charging is on the way.

3. Adjust the current among 0.3A~1.0A.  In order to prolong 

battery' life-span, we recommend to charge them u nder low 

current if you have enough time.

4. When LED flashing, the charger will enter the stage of drip 

current  charging. The LED turns green when fully 
charged , and the battery will be used at any time.

1. 

1. Do not insert anything conductive into the cooling hole when power is on, or damage will be caused to the charger.
2

.

 While charging is in process,

 

please do

 

not

 

make

 

it

 

near

 

flammable

 

materials

.

3

.

 It is not allowed to charge two-cell and three-cell Li poly

 

battery

 

at

 

the

 

same

 

time

.

4

.

Expect

 

Li

 

poly

 

battery, this charger is not allowed for other kinds of battery.

5. While charging,

 

please keep it out of the reach of Children

.

6. When this charger is in use,

 

please do not go away and leave it unwatched

if any abnormality

 

occurs

 

  (

such

 

as

 

the

 

power

 

indicator

 

is

 

off

the

 

temperature

 

of the battery rise rapidly

etc

.) 

stop

 

charging

 

immediately

.

7

.

 Please do not

 

use

 

power with

 

output voltage higher than 15V

.

8.

 

Please do not

 

disassemble

 

the

 

charger or

 

its accessories.

9

.

 When the battery is not cool down, please do not urge to charge it.

12V D

C

 Power supplier

Charging method and cautions

Li-Po battery(balance changer)

ATI-0910 Li-Po battery(balance changer) specifications

Specifications:
Input voltage:  DC  10V~15V
Output voltage: DC  7.4V & 11.1V (to 2 or 3 cell Li-Po battery) 
Charging current: 0.3A~1.0A (can be continuously adjusted) 

 

Indicator state:
Green: Charge complete & no battery
Red:  Charging
Flash: Drip current charging
The batteries are inspected separately. When the voltage 
reaches 4.20V, the charging process stops.

WWW.ART-TECH.COM

www.motionrc.com

Содержание ALPHA JET













Отзывы: