background image

3

Safety precautions

1. Do not fly outside in the thunderstorm, rainy and strong winds.

2. Do not fly nearby the airport, railway, road, power lines.

3. Do not fly where there are crowds of people

.

4. Make sure the model

 

plane

 

and

 

control

 

system is

 

under

 

normal

 

condition

 

before

 

flying

.

5. Only use Art-Tech genuine accessories as replacement for damaged parts.

6. Do not attempt to catch the ALPHA JET while flying.

6. Beginner should have an adult to guide. Not recommend for the children under the age of 14.

Statement

1. “ ALPHA JET ” is not a toy

which

 

is

 

only suitable

 

for the experienced pilot.

 

Please

 

keep

 

in

 

mind

 

that

 

you

 

are

 

  

responsible

 

for

 

the

 

safe

 

operation

 

for

 

this

 

model

 

and

 

damage

 

or

 

harm

 

which

 

may

 

cause

.

2. Please adjust this plane correctly according to instructions and make sure the finger and other parts of your body out of 
    the rotating parts of the plane, or it may cause damage to the plane or injury yourself.
3. The user bears full responsibility of proper operation and use of this model. Art-Tech and any of its distributors can not 
    be held responsible for any liability or loss due to improper operation.

WWW.ART-TECH.COM

www.motionrc.com

Содержание ALPHA JET













Отзывы: