Art-Tech ALPHA JET, Инструкция по эксплуатации

Страница: 7 / 12

6
WWW.ART-TECH.COM
Mode
Ⅱ
Functions for control set
Trim
Hook
Servo reverse
Power switch
Power indicator
Antenna
Carrying bar
Rudder
left
Rudder
right
Throttle Max
Throttle Min
Elevator down
Elevator up
Aileron
left
Aileron
right
Frequency Switch
Charger port
Notice
When turn on the power of the transmitter, the throttle should be in the lowest position. The power of the transmitter
should be turn on first, and then turn on the receiver.
The transmitter can not work properly if the frequency bind button is pressed down neglectfully. In this case, The
transmitter and the receiver must be bind again. More details , ease refer to the process of frequency bind for 2.4GHz
R/C system.
Please do not turn on several RC devices and bind them at the same time, bind only one set of RC device at
one time. The RC device should not be stay in bind state for a long time.
You will need 8 AAA batteries for operating the transmitter.
Servo reversing switches
If the direction of servo operation is not the same as the model, adjust the reversing switches to reverse the direction.
The lower position is the normal setting and the
upper position is the reverse setting.
Channel display
AIL.: Aileron (CH1)
ELE.: Elevator (Ch2)
THR.: Throttle (CH3)
RUD.: Rudder (CH4)
Model No.: EFLY-4B
Ⅱ
Number of channels: 4
Work frequency: 2.4GHz
Work current:
≤
150mA
Work voltage: 12V (1.5V*8AA batteries)
Land R/C distance: 200m
Air R/C distance: 400m
Certification: FCC, CE
Specifications
:
www.motionrc.com