User Guide -
MeshAP 3100 5GHz/2.4GHz Full Duplex Mesh Network Access Point
DOC-6200-0152
- 76 -
Enable Trap Server Destination IP Address
•
Replace
the default
IP address
to an IP address of the Trap Server
•
Replace
the default
Subnet Mask
with the one belonging to the above IP address.
Define SNMP Version and setup Community Name
•
Check
the version SNMP desire with the radio button.
•
Enter
a name for the Community.
Note:
Default name is “
public
”
SNMP Community (Work Group)
SNMP Community is defining the IP address range could be access by the NMS.
Define Community IP Range
•
Enter
the IP Address to define community IP convention
•
Enter
the Netmask to set Subnetmask the range for the IP convention. The
Netmask is use to define the range size of the community.
•
Check
the Radio button “RO” for
Read Only
•
Check
the Radio button “RW” for
Read / Writer
