User Guide -
MeshAP 3100 5GHz/2.4GHz Full Duplex Mesh Network Access Point
DOC-6200-0152
- 31 -
There are two modes available to assign IP address to the Mesh Manager unit
DHCP Mode
– Auto Assign an IP address to Mesh Manager unit via Network
Gateway/Router.
Static Mode
– Assign IP address manually to Mesh Manager unit
o
Replace
the default
IP address
to an IP address of your choice that could
be reached from the existing network. You can also select an IP address
provided by the ISP as your
MeshAP IP Address
o
Replace
the default
Subnet Mask
with the one belonging to the above IP
address.
o
Enter
the
Gateway IP
of the above IP address or the IP address provided
by your ISP as a
Gateway IP
address. (For Remote Management)
IMPORTANT:
Make sure the gateway address and the IP address of the unit are under the
same network. If not, the unit may not be able to log-on because the network is not
logically connected.
Step 4
