User Guide -
MeshAP 3100 5GHz/2.4GHz Full Duplex Mesh Network Access Point
DOC-6200-0152
- 72 -
using the Fail-Safe/Local IP address for the Mesh Manager and retrieve the actual IP
Address being assigned to the Mesh Manager unit from the ISP.
Change the Fail-safe/Local IP Address
MeshAP Station Fail-safe/Local IP Address List
The default Fail-safe/Local IP addresses is 192.168.1.8. If this address is costing conflict
with existing IP address. MeshAP Station could be set to 10.10.10.8 as the Fail-safe/Local
IP Address.
To Set Fail-safe/Local IP for Mesh Station
Step 1:
Login
to the Station Management Interface
Step 2: Go to
Setup
under
MESH
. Click on the “
Advanced
” tab
Step 3: Select
either
192.168.1.8
or
10.10.10.8
as the Fail-safe/Local IP address
Step 4: Click
“Save Settings and Apply”
Note:
There are only two Fail-safe/Local IP addresses could be chosen for Mesh AP
Station.
192.168.1.8
or
10.10.10.8
.
Mesh Manager Fail-Safe/Local IP Address List
The default Fail-safe/Local IP addresses is 192.168.1.8. If this address is costing conflict
with existing network IP address. There are ten(10) other pre-assign Fail-safe/Local IP
addresses for Mesh Manager could be set to avoid IP conflict on the exist network.
