User Guide -
MeshAP 3100 5GHz/2.4GHz Full Duplex Mesh Network Access Point
DOC-6200-0152
- 40 -
Note:
The default IP address for a MeshAP Access Point in Manual model is:
192.168.1.8
Use the default IP address to configure a unit that is not connected to any mesh network.
Important:
When the unit is connected to a mesh network (established mesh link with a
Mesh Manager unit or Station unit), the unit’s IP address is no longer valid. The Mesh
Manager’s unit IP address will be used to manage an individual unit on the mesh. Each unit
(Station) could be managed under the Mesh Manager’s
Topology
section.
Mesh ID
The Mesh ID is a unique identification for a mesh network. Only MeshAP Access Points
with the same Mesh ID will be able to associate with each other on the mesh network.
To protect an individual mesh network, the Mesh ID of a mesh network should be secretly
kept to prevent other non-mesh Access Points to associate with the mesh group.
Step 5. Replace
the default
Mesh ID
with a preferred name with the Mesh Manager.
MeshAP Stations MUST use the same Mesh ID in order to be managed by the
Mesh Manager unit.
Step 6.
Update
Station Name.
(The Station Name is NOT required, it is recommended for
easy identification of each Station.)
Step 7.
Update
Station Location.
(The Station Location is NOT required, it is
recommended for easy identification of each Station.)
