Chapter 4
:
Battery Installation and Removal
Release 8 STANDARD 1.5 August 2016
Touchstone TG862G Telephony Gateway User Guide
© 2011-2016 ARRIS Enterprises LLC. All Rights Reserved.
19
2.
Hold the battery pack so that the guides on the battery align with the slots on the
Telephony Gateway and slide the battery into the bay.
1 - Battery Slots
2 - Battery Guides
Note: Batteries will not insert completely into the Telephony Gateway if not oriented
correctly. The battery should slide into the bay without significant force. Line up the
guides on the battery with the slots in the battery bay.
3.
Push the battery pack into the bay until it seats into place. If you are taking the battery
out of the Telephony Gateway, position your finger in the battery opening area and use
leverage to dislodge the battery while pulling it straight back.
Note: The Telephony Gateway will not begin operating until you apply AC power.
4.
Replace the door. To do so, place the hinge tabs of the battery door into the receiver slots
inside the Telephony Gateway battery compartment on the opposite end of the battery
opening. Rotate the door toward the unit until the latch snaps back into place.
