Arris NVG595, Руководство администратора

Страница: 67 / 226

67
7. Select the Add Match
Add Match Add Match
Add Match button below the new rule created in step 5. This opens the
Match Entry
view.
8. For this example, the filter will be made based on a TCP port. So select
Protocol
from the
Match Type
drop
down menu, this automatically fills in TCP in the
Match Value
field. At this point do not enable the rule until
all criteria has been entered.
9. Click
Enter Match Enter Match Enter Match Enter Match
. This will return the GUI to the Packet Rules list.
10. Select Add Match
Add Match Add Match
Add Match below the rule created earlier.
11. Select
Destination Port
from the
Match Type
drop down menu and enter 21 (this value corresponds to FTP)
in the
Match Value
entry box.
12. Click
Enter Match Enter Match Enter Match Enter Match
.
13. Select Add Match
Add Match Add Match
Add Match below the same rule created earlier.
14. Select
Destination IP Address
from the
Match Type
drop down menu and enter the IP address entered in
Step 3 of this procedure.
15. Select the check box by
Enable Rule
and click
Enter Match Enter Match Enter Match Enter Match
. The GUI is returned to the Packet Rules list and
the rule is active and grayed out and cannot be edited without first disabling the rule.