171
set system supplicant enable [ on | off ]
Turns on the 802.1x supplicant functionality. You must set the corresponding "type" field in the WAN link to
activate it:
NOS/142253966608 (top)>> set link name WAN supplicant
supplicant
type (none) [ none | eap-tls ]:
priority (0) [ 0 - 7 ]:
Default is
on
.
set system supplicant dest-broadcast [ off | on ]
Mostly useful for debugging. If this is set to
on
, the destination MAC address FF:FF:FF:FF:FF:FF is used when
the supplicant sends 802.lx packets. If this is
off
, the EAPOL-specific destination address of 01:80:C2:00:00:03 is
used. Default is
off
.
set system supplicant eap-tls-identity
string
Sets the identity sent by the supplicant in response to an Identity request from an 802.1x authenticator.
set system supplicant server-cert-check [ on | off ]
If set to
on
, examines the certificate chain sent by an 802.1x authenticator for validation, and ensures that the
root cert of this chain is accepted by the CPE (i.e. in its trust list). Default is
on
.
set system supplicant tagging-enable [ off | on ]
Disable or enable VLAN tagging on the WAN port.
set system syslog enable [ on | off ]
Enables (on) or disables (off) the NVG595 syslog function. The syslog function is disabled by default. If syslog is
enabled, the following additional syslog settings may be configured:
set system syslog server-ip <IPv4/IPv6 Address>
set system syslog server-port <port>
set system syslog facility [ local0 ... local7 ]
set system syslog level [ 0 ... 7 ]
set system syslog log-system [ on | off ]
set system syslog log-firewall [ on | off ]
set system syslog log-igmp [ on | off ]
set system syslog log-voice [ on | off ]
You must specify the syslog server’s IP address and any custom UDP port number to identify system logging
messages with the
set system syslog server-ip <IPv4/IPv6 Address>
set system syslog server-port <port>
commands. After the syslog server is specified, you may turn on any or all of the logging categories.
The receiving server must have a properly configured syslog server package active.
set system syslog server-ip <IPv4/IPv6 Address>
Specifies the IP address (in IPv4 dotted decimal notation or IPv6 colon-separated hexadecimal notation) of the
server that syslog messages will be sent to.
Содержание NVG595
