Installation
IPC1100 Advanced IP Client Video Set-top
•
Installation and Operations Manual
17
365-095-24769 x.1 10/13
Installation Overview
1.
Determine if you are connecting to a:
Device
Connection
High-Definition TV or monitor
Use the component video (YPbPr) or the HDMI output. No other video connection
supports HDTV.
If the TV has no HDMI input but does have a DVI input, connect a DVI-to-HDMI adapter or
cable to the HDMI out connector on the IPC1100 set-top, and the DVI-HDTV connector on
your TV. Note: A separate audio connection will be needed.
Standard- Definition TV
Connect the composite video connector using a composite (RCA phono) cable. If the TV
only has a coaxial RF input, connect it to the IPC1100 RF OUT connector
2.
Determine if you are connecting the audio to a home theater receiver or directly to the TV:
ο
For an HDMI video connection, no additional audio connections to the TV are required.
ο
For a DVI video connection, additional audio connections to the TV are required.
ο
If the receiver or TV has a digital audio (S/PDIF) input, use the digital audio OPTICAL (S/PDIF)
output.
ο
Otherwise, use the baseband left and right audio outputs.
3.
Locate the cabling diagram(s) that best match the subscriber’s configuration.
4.
Connect the audio and video cables in a manner matching that diagram.
5.
Determine if you are connecting to a data device (see Data Device Connections in this section). For
installation details, refer to the instructions included with the data device.
6.
Connect the cable terminal to the coaxial cable wall outlet.
7.
Perform the operational check for the remote control.
8.
Optimize the high-definition settings. See Optimizing the High-Definition Settings in this section.
