ARRI Orbiter, Инструкция по безопасности и установке, Страница: 15 / 25

15
Basic FeaturesBasic Features
15
Wireless DMX
The antenna for the CRMX interface is mounted on the right side of the Orbiter
USB Ports
The Orbiter has two USB-A ports (23) to upload firmware, upload and download fixture settings and favorite
or download error and service logs using an USB memory stick. The memory stick must be formatted with
the FAT32 file system.
The USB-C port (23) is used to connect the Orbiter to a PC / notebook for service purpose.
USB Ports on the Front Side
The Orbiter has two USB ports (10, 11) on the front side for recognition of the mounted optics and for com-
munication with optical accessories.
The interface for recognition of the mounted optics (11) automatically connects to the optics when the op-
tics are mounted.
The interface for communication with optical accessories (10) is designed as a 5-pin lockable Lemo con-
nector.
SD card slot
The Orbiter has an SD card slot (22) for updating firmware, loading and saving fixture settings and favorites.
storing error and service logs using an SD card. The SD card slot accepts standard SD and SDHC cards.
Ethernet Interfaces
The Orbiter is equipped with two RJ45 Ethernet connectors (26 and 27). The Ethernet signal can be daisy-
chained as the Orbiter acts like a switch in an Ethernet network. The interface can be used for control, up-
loading new firmware, setting parameters and service purpose using the ARRI lighting service manager.
Download the ALSM free of charge from the ARRI web site www.arri.com/lightingsoftware.
Please find more detailed information to work with the ALSM in the user manual of the software.
The manual is included in the download package.
Control Panel
The optional control panel for the Orbiter can be used directly at the fixture or via a connecting cable remote
from the Orbiter. When used directly on the Orbiter, the control panel is held magnetically in the recess at
the rear of the fixture (see figure below). The control panel for the Orbiter automatically connects to the
fixture when it is inserted into the recess.
Disconnect all data cables from the product before using an USB memory stick. The data transfer
between the product and the USB memory stick might be disturbed due to interferences.
Do not use service features during a show or a shot. The data transfer between the product and the
controller might be disturbed due to interferences.
Both USB-A ports can power small USB devices. The maximum current is 1500 mA @ 5V (left USB-
A port) or 500 mA @ 5V (right USB-A port). Do not overload the USB-A connector.
NOTICE