ARRI Arriflex 435 Advanced, Инструкция по эксплуатации, Страница: 99 / 156

99
Displaying Programs
which are Stored in the Camera
• Depress the “PROG”-button to activate the stored program.
• Depress the “MODE”-button six times (or four times if
no functional expansion module is attached) to change
to Mode 7.
• The display shows an angle symbol and the starting
shutter angle in the upper line. In the lower line the
starting frame rate is shown.
• Depress the “SEL”-button.
• The display shows an angle symbol and the end
shutter angle in the upper line. In the lower line the
end frame rate is shown.
• Depress the “SEL”-button.
• In the upper line “SEC” (or “SECLO“ for LO, “SECHI“
for HI rampspeed) is shown, in the lower line the ramp
time.
• Depress the “SEL“-button – the camera will display the
screentime SCrtI for the calculated screen time based
on 24 fps screening speed.
Note: After 3 seconds the display switches back ito
the start display of mode 7.
The INFO Menu
The INFO menu allows access to the menu points STATUS
and COUNTER and enables switching on and off the acoustic
signal on the camera control unit.
The 3rd menu point is not available
on the ARRIFLEX 435 Advanced.
• Select the desired menu point with keys “1” to “2”.
• Switch on or off the acoustic signal with key “4”.
STATUS
STATUS displays the values currently set on the camera.
COUNTER
COUNTER displays the current values of the total exposed
film and take counters as well as the power supply voltage
to the camera.
SOUND CCU ON/OFF
The acoustic signal of the CCU can be switched on and
off with key “4”. When switched on, a test signal sounds.
Accessories