ARRI Arriflex 435 Advanced Скачать руководство пользователя страница 94

Страница: 94 / 156

LENGTH-UNIT

The LENGTH-UNIT mode enables switching the film
counter between meters and feet.

• Select meters with key “1” or feet with key “2” - the

selected unit of measurement is displayed against a
dark background.

• Transfer the chosen setting to the camera with the

“SEND”-key.

• Select the desired combination with the corresponding key.
• Transfer the chosen setting to the camera with the

“SEND”-key.

COUNTER DISPLAY MODE

The COUNTER DISPLAY mode enables changing the
configuration of the film counter.
There are three possible combinations:

Note:

The third menu point is not available on the
ARRIFLEX 435 Advanced.

camera-display

Mode 1

Mode3

total exposed film counter

take counter

total exposed film counter

remaining film counter

Accessories

Содержание Arriflex 435 Advanced





























































































































































Результаты поиска

Содержание Arriflex 435 Advanced

Отзывы:

ARRI Arriflex 435 Advanced, Инструкция по эксплуатации, Страница: 94 / 156

Результаты поиска

Содержание Arriflex 435 Advanced

Отзывы: