manualshive.com logo in svg

ARRI Arriflex 435 Advanced, Инструкция по эксплуатации, Страница: 23 / 156

Поделиться
Скачать
ARRI Arriflex 435 Advanced Скачать руководство пользователя страница 23

23

Mains Unit NG 12/24 R

Use of the mains unit is recommended for filming in the studio
and when using electronic accessories with a high power
consumption. It is suitable for frame rates up to 130 fps.

• First check that the correct mains voltage is set on the

mains unit.

• Ensure that the main switch on the camera is off.
• Set the voltage switch on the mains unit to 24 V.
• Plug the battery cable KC 20S or the spiral battery

cable KC 29S into the power supply socket on the
camera and into the 24 V-socket on the mains unit.

Mains Unit NG 12/26 R

Use of the mains unit is recommended for filming in the studio
and when using electronic accessories with a high power
consumption. It is suitable for frame rates up to 150 fps.

• First check that the correct mains voltage is set on the

mains unit.

• Ensure that the main switch on the camera is off.
• Set the voltage switch on the mains unit to 26 V.
• Plug the battery cable KC 20S or the spiral battery

cable KC 29S into the power supply socket on the
camera and into the 26 V-socket on the mains unit.

Note:

The NG 12/24 R can easily be upgraded to an
NG 12/26 R at an ARRI service center.

Power Supply

Содержание Arriflex 435 Advanced





























































































































































Отзывы:

Нет отзывов