ARRI Arriflex 435 Advanced Скачать руководство пользователя страница 37

Страница: 37 / 156

Exchanging the Ground Glass

• By briefly depressing the “PHASE”-button in standby, the

shutter is positioned to protect the mirror surface from
damage as far as possible

➪

photo

• Before exchanging the ground glass, switch the camera’s

main switch off and disconnect the camera from the power
supply!

• Remove the lens or the protective cap.

Do not touch the mirror surface!

• Using the included special forceps, pull the ground

glass

➪

photo

out of the holder by its tongue

➪

photo

• Check that the ground glass to be inserted as well as

the ground glass frame are completely clean.

• With the special forceps, push the chosen ground glass

into the holder as far as it will go. The red marker point
must be on the left. A ball catch fixes the ground glass
exactly in the right position.

• Check that the ground glass is correctly locked in place.

Note:

Cleaning or exchanging the field lens, see
Chapter 14, Cleaning the Field Lens.

Camera Body

ground glass

tongue

Содержание Arriflex 435 Advanced





























































































































































Результаты поиска

Содержание Arriflex 435 Advanced

Отзывы:

ARRI Arriflex 435 Advanced, Инструкция по эксплуатации, Страница: 37 / 156

Результаты поиска

Содержание Arriflex 435 Advanced

Отзывы: