manualshive.com logo in svg

ARRI Arriflex 435 Advanced, Инструкция по эксплуатации, Страница: 22 / 156

Поделиться
Скачать
ARRI Arriflex 435 Advanced Скачать руководство пользователя страница 22

22

Battery NC 24/7 R

The battery NC 24/7 R has a capacity of 7 ampere-hours
and is suitable for frame rates up to 130 fps.
• Ensure that the main switch on the camera is off.
• Plug the battery cable KC 20S or the spiral battery

cable KC 29S into the power supply socket on the
camera and into the battery-socket.

Note:

If the battery voltage is not sufficient for the
chosen frame rate, the “bat” symbol will show
in the camera display.

Charger NCL 24 R

With this charger all ARRI 24 V batteries can be charged.
• First check whether the correct mains voltage is set on

the charger.

• Connect the charger to the mains supply.
• Plug the charger cable into the battery socket.
• Press the start button.

Indication of the LEDs

LED

Indication

yellow

discharging (1A)

red

charging

green

charger connected to the mains

Power Supply

Содержание Arriflex 435 Advanced





























































































































































Отзывы:

Нет отзывов