ARRI ARRIFLEX 16S, Руководство по эксплуатации

Страница: 9 / 22

Bayonet Lock Lens Mounts
One of the three lens sockets is for lenses in Bayonet Lock Mounts. This stronger
mount, is primarily intended for zoom lenses or other larger, heavier lenses.
To seat Bayonet Lock Lenses: Note the locking lugs at the rear of the lens mount
-position the lens so the lens data engravings are on the top, and the lugs are in
line with the keyways in the socket. (See illustration). Insert the lens as far as it
will go and then twist the entire lens clockwise by 15°. You will hear and feel the
mount latch into place. The lens locking levers (38) operate automatically in this
case and need not be depressed.
To remove Bayonet Lock Lenses: Press the Locking Levers (38) together, rotate
the lens counterclockwise. Then lift the lens out of the cavity.
Always try to hold the lens on a fixed part of the barrel. Don't rotate the lens for
mounting purposes by the focusing or iris rings. The Bayonet Lock mount
provides seating and lens alignment of superior precision and durability. Use
zoom lenses always in Arri Bayonet Lock Lens Mounts.
Lenses for Arriflex are made by the
world's leading optical manufacturers
and represent the ultimate in optical
and mechanical quality. Lenses
available for the Arriflex 16 range in
focal length from 5.7mm on up.
Standard lenses are equipped with
follow-focus grips (20) and most have
diaphragm click-stops. Use only
lenses in genuine Arriflex lens mounts
to insure trouble-free operation and
optimum image quality. For extremely
long or heavy lenses, lens support
systems of various types are
available, the most practical of which
is the standard ARRIFLEX bridge
plate system.