ARRI ARRIFLEX 16S, Руководство по эксплуатации

Страница: 5 / 22

Arriflex 16S
Operating Instructions
Each Arriflex 16 S/B is SUPPLIED WITH:
1 Test film taken with camera
2 Plastic skewer for cleaning emulsion from film gate.
3 Bottle with special camera oil
4 Tube of special grease for lens cavities of camera and lens mounts.
5 Pressure Oiler
6 Guarantee Card
7 Instruction Manual
The shipping container in which the camera is supplies should be saved
and used in case the camera has to be sent for service.
NOTE: Numbers in ( ) refer to callouts on front overleaf.
Holding the Camera
Place thumb of right hand between
contour grip (21) and side of camera,
while the other fingers reach forward
around the “bulge” so they are free to
actuate the follow-focus grips (38) and
diaphragm ring of the lens in taking
position. Place palm of left hand
around finder housing on left side of
camera, fingers over ON-OFF switch
this way, camera can be held steady
and comfortably.
When the “ON” switch (10) is pressed
down, it remains locked in the down-
position until the release lever (11) is
pushed in.
An accessory PISTOL GRIP WITH OR WITHOUT SHOULDER BRACE IS ALSO
AVAILABLE. It is attached to the tripod socket in the base of the camea and has
its own release trigger which activates a switch inside the tripod socket.