North America • Latin America • India • Europe / Middle East / Africa • China • Pacific Rim
armstrong
international.com
Designs, materials, weights and performance ratings are approximate and subject to change without notice. Visit
armstrong
international.com for up-to-date information.
3
Safety
Icon Legend:
— DANGER! … Injury or death and property damage are
imminent
.
— WARNING! … Injury or death and property damage are
possible
.
— CAUTION! … Potential property damage, expensive repairs, and/or voiding the equipment
warranty
may result
.
— BURN HAZARD! … BURN HAZARD! Direct exposure to steam, hot water, or hot metal surfaces
can cause severe skin burns. Skin contact with 140°F (60°C) water or metal
for only five (5) seconds may cause a second-degree burn.
General Safety Guidelines:
1. Inappropriate use of this product (beyond typical, intended use) could cause damage to the product and
other property. It may also result in personal injury or, in extreme cases, death.
2. Only designated, qualified, and competent personnel should conduct installation, maintenance, and
service in accordance with the directions in this product instruction manual.
3. Installation shall comply with all applicable federal, state, and local, electrical and construction, regulatory
codes.
4. Improper installation, start-up, operation, maintenance, or service may void the product warranty.
5. When installing, commissioning or servicing this product:
a. ALWAYS select and wear appropriate personal protective equipment (PPE) before carrying out any
physical work at the job site. Appropriate PPE may include hard hats, safety glasses, gloves, boots
or shoes w/ non-slip soles and toe guards, and protective overalls.
b. ALWAYS scan the work area and take note of potential hazards before entering. Adjust your travel
path or work position to avoid hazards and personal injury.
c. ALWAYS observe designated safety procedures when working in hazardous locations (areas
containing explosive and combustible gases, vapors, and dusts) and
confined spaces
(locations
where the breathable air supply may be limited or variable or where entrapment could occur).
d. ALWAYS use appropriate lockout-tagout procedures to disconnect power sources and de-energize
machinery before conducting installation, service, and repair.
e. ALWAYS use great care and appropriate safety gear when working above ground level, especially
on ladders and platforms or in the presence of overhead, electrical power lines.
f. ALWAYS ensure that all “live” steam, water supply, and condensate return lines are isolated before
breaking or loosening any plumbing joints.
g. ALWAYS carefully relieve any residual internal pressure in the system or connecting pipe work
before breaking or loosening any plumbing joints.
h. ALWAYS allow hot parts to cool before commencing work to avoid the risk of skin burns.
Failure to comply with instructions following a safety icon may result in adverse consequences
including, property damage, personal injury, or, in extreme cases, death.
