North America • Latin America • India • Europe / Middle East / Africa • China • Pacific Rim
armstrong
international.com
Designs, materials, weights and performance ratings are approximate and subject to change without notice. Visit
armstrong
international.com for up-to-date information.
23
Electrical Connections
Top Plate to Upper Canister
Note:
Consult wiring schematic provided with your heater for exact details. Remove all cable ties, bubble wrap, and tape from wiring.
4
Reconnect spark rod
wire to
spark rod in burner.
5
Reconnect threaded fitting to
burner flame sensor port.
1
Route blower motor
wiring through conduit and
into disconnect panel.
2
In disconnect panel, connect
wires to motor overload connection
terminals below motor starter.
3
Route
actuator
wiring through conduit
and into control panel.
6
Reconnect water pressure switch wiring on top plate to
water pressure switch on upper canister.
