36
ARMASIGHT by FLIR
PVS-14
U S E R M A N U A L
NO. INTERVAL
LOCATION,
CHECK/SERVICE
PROCEDURE
NOT FULLY MISSION CAPABLE IF...
19 Before/
After
ACCESSORIES
CAUTION
:
The coating on the demist shield can be
damaged if cleaned while wet or if cleaned
with wet lens paper. Clean only when
the demist shield is dry and only with dry
paper.
Inspect for dirt, dust, scratches or damage.
If necessary, clean when shield is dry (use
dry lens tissue only).
Damage or scratches hinder
vision when the monocular is
turned on.
20 Before/
After
Sacrificial
Window
Inspect for dirt, dust, scratches or damage.
If necessary, clean per paragraph 4.4.1.
Damage or scratches hinder
vision when the monocular is
turned on.
21 Before/
After
Compass
Inspect for dirt, dust, scratches, or damage.
If necessary, clean with water and dry with
lens tissue.
Install compass and turn on monocular.
When the illumination button is depressed,
compass should be visible.
Damaged; compass is not
visible.
22 Before/
After
Magnifier
Inspect optical surface for dirt, dust,
scratches or cracks.
Damage; scratches hinder
vision.
23
Before/
After
Case
CARRYING CASE
Remove all items and shake out loose dirt
or foreign material. Inspect for tears, cuts,
excess wear, or damage to mounting clips.
24 Before/
After
Shoulder
Strap
Inspect for cuts, tears, or excess wear or
damaged clips.
4.2 TROUBLESHOOTING PROCEDURES
4.2.1. TROUBLESHOOTING
Table 4.1 lists common malfunctions that may occur with the equipment. Perform the tests, inspections
and corrective actions in the order they appear in the table.
This table does not list all of the malfunctions that may occur with your device, nor does it include
all tests, inspections, or corrective actions that may be necessary to identify and fix defects. If you
experience an equipment malfunction that is not listed, or suggested corrective actions do not correct the
fault, please contact Customer Support.
TABLE 4-1. CONTINUED
