35
ARMASIGHT by FLIR
PVS-14
U S E R M A N U A L
NO. INTERVAL
LOCATION,
CHECK/SERVICE
PROCEDURE
NOT FULLY MISSION CAPABLE IF...
11 Before/
After
Head mount
Straps/Pads
NOTE
:
If any of the following items are damaged
it does not cause the entire end item to be
“not fully mission capable”. However, the
damaged item should be replaced as soon
as practical to restore full capability of the
system.
Inspect for cuts, tears, fraying, holes,
cracks, or defective fasteners.
Damage causes straps or
pads to be unusable.
12 Before/
After
Socket
Inspect for dirt, dust, or corrosion.
Insert monocular latch into socket to verify
secure attachment of monocular to head
mount. If necessary, clean socket with
water.
Damaged, latch won’t lock or
is too loose.
13 Before/
After
Eye Relief
Adjustment
Press the eye relief adjustment and check
for free motion. Inspect for damage.
Binding, damaged or non-
operational slide mechanism.
14 Before/
After
Straps
HELMET MOUNT
Inspect for cuts, tears, fraying, holes,
cracks, or defective fasteners.
Damage causes straps to be
unserviceable.
15 Before/
After
Socket
Inspect for dirt, dust, or corrosion.
Insert monocular latch into socket to verify
secure attachment of monocular to helmet
mount. If necessary, clean socket with
water.
Damaged, latch won’t lock or
is too loose.
16 Before/
After
Fore-and-Aft
Adjustment
Press the two side buttons on plastic
mount or depress side lever on metal
mount and check for free motion.
Inspect for damage.
Binding, damaged or non-
operational slide mechanism.
17 Before/
After
Head mount/
Helmet
Mount
Adapter
MOUNTING ADAPTERS
Inspect for dirt, dust or corrosion.
Insert into head mount or helmet mount
socket to verify secure attachment.
Damaged, will not latch
securely.
18 Before/
After
Weapon
Mount
Inspect for dust, dirt or corrosion.
Damaged, will not mount to
monocular or will not mount
to rail.
TABLE 4-1. CONTINUED
