24
ARMASIGHT by FLIR
PVS-14
U S E R M A N U A L
NOTE:
When using the monocular without a mounting device, make sure to place the neck cord around your
neck.
1. Ensure that the battery are installed per paragraph 3.2.2.
2. Turn the power switch to ON.
NOTE:
The sharpest image will be observed only when the objective lens and eyepiece lens are properly
focused.
3. Rotate the diopter adjustment for the clearest view of the image intensifier screen.
4. Focus the objective lens while observing an object until the sharpest image is obtained.
3.3.2. HEAD MOUNTED OPERATION
Perform the following procedures for head mounted operation.
CAUTION:
Only operate the monocular in dark environments; if it is necessary to operate the device in daylight,
use the objective lens cap to cover the objective lens.
1. Verify that the batteries are installed per paragraph 3.2.2.
2. Put the head mount on per the instructions in paragraph 3.2.6.
NOTE:
Before attaching the monocular, depress the eye relief adjustment and slide the head mount socket
all the way forward; this will make it easier to align the monocular, eyecup, and eyepiece lens to the
eye.
3. Align the head mount/ helmet mount adapter’s latch to the head mount socket (Figure 3-14). Hold
the latch lever down while installing the monocular into the head mount socket.
Release the latch when the monocular is fully engaged in the socket.
4. To set your eye relief, press down on the eye relief adjustment (Figure 3-14). Move the monocular
back towards your non-dominant eye until the eyecup is comfortably sealed around the eye.
5. Turn the monocular ON.
6. Readjust the vertical adjustment (Figure 3-3) of the head mount until the monocular is properly
aligned with your eye.
7. Rotate the diopter adjustment for the clearest view of the image intensifier screen.
