manualshive.com logo in svg

Armasight FLIR PVS-14, Руководство пользователя

Поделиться
Скачать
Armasight FLIR PVS-14 Скачать руководство пользователя страница 23

23

ARMASIGHT by FLIR

PVS-14       

U S E R   M A N U A L

5. Ensure that the compass fits tightly to the objective lens.

NOTE:

The o-ring must be correctly placed in the compass in order for the compass to fit properly.

6. Refer to paragraph 3.3.6 for compass operation.

3.2.13. INSTALLATION OF THE MAGNIFIER 

The 3x or 5x magnifier can be threaded directly into the objective lens. It can also be threaded into the 

focus ring adapter and slipped on over the end of the objective lens.
Figures 3-12 and 3-13 illustrate these installation procedures.

3.3 OPERATING PROCEDURES

This section contains operating procedures for using the PVS-14 as hand-held, head-mounted, helmet-

mounted or weapon-mounted monocular. Before operating the monocular, verify that all steps in 

paragraph 3.2, Assembly and Preparation for Use, have been read and performed.

3.3.1. HAND-HELD OPERATION

Only operate the monocular in dark environments; if it is necessary to operate the device in daylight,  use 

the objective lens cap to cover the objective lens.

THREAD DIRECTLY INTO 

OBJECTIVE LENS AS SHOWN

FIGURE 3-12. 3X MAGNIFIER INSTALLATION

3X MAGNIFIER

FOCUS RING 

ADAPTER

STEP 1

STEP 2

THREAD 3X MAGNIFIER INTO 

FOCUS RING ADAPTER

FIGURE 3-13. 3X MAGNIFIER INSTALLATION WITH FOCUS RING ADAPTER

Содержание FLIR PVS-14

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды