manualshive.com logo in svg

ARM Cortex-M4, Универсальное руководство пользователя, Страница: 255 / 276

Поделиться
Скачать
ARM Cortex-M4 Скачать руководство пользователя страница 255

Cortex-M4 Peripherals 

ARM DUI 0553A

Copyright © 2010 ARM. All rights reserved.

4-39

ID121610

Non-Confidential

4.5.2

MPU Control Register

The MPU_CTRL register:

•

enables the MPU

•

enables the default memory map background region

•

enables use of the MPU when in the hard fault, 

Non-maskable Interrupt

 (NMI), and 

FAULTMASK escalated handlers.

See the register summary in 

Table 4-38 on page 4-38

 for the MPU_CTRL attributes. The bit 

assignments are:

When ENABLE and PRIVDEFENA are both set to 1:

•

For privileged accesses, the

 default memory map

 is as described in 

Memory model

 on 

page 2-12

. Any access by privileged software that does not address an enabled memory 

region behaves as defined by the default memory map.

•

Any access by unprivileged software that does not address an enabled memory region 
causes a MemManage fault. 

XN and Strongly-ordered rules always apply to the System Control Space regardless of the 
value of the ENABLE bit. 

31

1 0

Reserved

HFNMIENA

ENABLE

2

PRIVDEFENA

3

Table 4-40 MPU_CTRL register bit assignments

Bits

Name

Function

[31:3]

- Reserved.

[2]

PRIVDEFENA

Enables privileged software access to the default memory map:
0 = If the MPU is enabled, disables use of the default memory map. Any memory access to a 
location not covered by any enabled region causes a fault.
1 = If the MPU is enabled, enables use of the default memory map as a background region for 
privileged software accesses.
When enabled, the background region acts as if it is region number -1. Any region that is 
defined and enabled has priority over this default map. 
If the MPU is disabled, the processor ignores this bit.

[1]

HFNMIENA

Enables the operation of MPU during hard fault, NMI, and FAULTMASK handlers. 
When the MPU is enabled:
0 = MPU is disabled during hard fault, NMI, and FAULTMASK handlers, regardless of the 
value of the ENABLE bit
1 = the MPU is enabled during hard fault, NMI, and FAULTMASK handlers.
When the MPU is disabled, if this bit is set to 1 the behavior is Unpredictable.

[0]

ENABLE

Enables the MPU:
0 = MPU disabled
1 = MPU enabled.

Содержание Cortex-M4





















































































































































































































































































Отзывы:

Нет отзывов