manualshive.com logo in svg

Arlyn Scales ArlynGuard S MKE-5-IS-SP, Инструкция по эксплуатации

Поделиться
Скачать
Arlyn Scales ArlynGuard S MKE-5-IS-SP Скачать руководство пользователя страница 7

 

7 

Control Drawing #4010   

MKE-5-IS General Dimensions  

 

 

 

 

1 Sheet 

Control Drawing #4011    

MKE-5-IS Indicator Label Drawing   

 

 

 

1 Sheet 

Control Drawing #4013   

MKE-5-IS Inst. and Wiring Diagram   

 

 

 

7 Sheets 

Control Drawing #7213   

Approved SAW-IS Body Type SAW-LC-08215, Label Drawing    

1 Sheet 

Control Drawing #7214   

Approved SAW-IS Body Type SAW-LC-16033, Label Drawing    

1 Sheet 

Control Drawing #7334   

Approved SAW Load Cells Installation and Wiring Diagram 

 

2 Sheets 

FACTORY MUTUAL APPROVAL AND INTRINSIC SAFETY 

The MKE-5-IS SAW Scale System has been rated intrinsically safe by Factory Mutual only when used with specific 
intrinsically safe Arlyn load cells and the installation is performed by a qualified technician who conforms to the 

guidelines described in this manual. Consult the chapter titled “Installation and Wiring” along with the control 

drawings in the back of this document for information pertaining to the installation and wiring of the approved 
SAW Load Cells. 

MKE-5-IS (a). Digital Weight Indicator System 

Intrinsically Safe for use in Class I, II and III, Division 1, Groups A, B, C, D, E, F and G; Temperature Class

 

T3C Tamb = -25°C to +40°C; 

Temperature Class T3B Tamb = -25°C to +60°C in accordance with Control

 

Drawing No.4013; Intrinsically safe apparatus for use in Class 

I, Zone 0, AEx ia IIC T3 Ta = -25°C to+60°C;

 

in accordance with Control Drawing No. 4013; Nonincendive for use in Class I, II, III, Division 

2, Groups A,

 

B, C, D, E, F & G; Temperature Class T6 Tamb = -25°C to +60°C; in accordance with Control Drawing

 

No.4013; Hazardous 

(Classified) Locations. 

 
SAW-IS Load Cells (a.k.a SAW-LC-IS) 

Intrinsically Safe for use in Class I, II and III, Division 1, Groups A, B, C, D, E, F and G; Temperature Class T3C Tamb = -25°C to +40°C; 
Temperature Class T3B Tamb = -25°C to +60°C in accordance with Control Drawing No.7334; Intrinsically safe apparatus for use in Class 
I, Zone 0, AEx ia IIC T3 Ta = -25°C to+60°C; in accordance with Control Drawing No. 4013; Nonincendive for use in Class I, II, III, Division 
2, Groups A, B, C, D, E, F & G; Temperature Class T6 Tamb = -25°C to +60°C; in accordance with Control Drawing No.7334; Hazardous 
(Classified) Locations. 

Intrinsic Safety, Limitations and Restrictions  

The following items represent limitations and restrictions concerning using this scale system as a FM approved intrinsically safe 

system. All items on this list must be adhered to for FM approval to be valid. Disregarding any of these items would violate intrinsic 

safety and FM approval, possibly resulting in serious death. 

 

1.

 

The installation needs to be performed by a qualified technician who is familiar with National Electrical Code and RP 12.6 

(Recommended Practice) requirements for installation of equipment in hazardous areas. Consult NEC Article 504, Intrinsically 

Safe Systems, published through the Instrument Society of America. 

2.

 

Only Arlyn, FM approved, SAW Load Cells may be used. Only one SAW Load Cell per Platform per scale maybe connected. 

3.

 

The installation technician must conform to all instructions and control drawings in this manual. 

4.

 

The indicator and SAW Load Cell must have the appropriate labeling that complies with the control drawings. 

5.

 

All wiring and connections must comply with the National Electrical Code (NEC). 

6.

 

The cable type and length limitation must comply with the control drawings. 

7.

 

No modifications of this system may be made in the field. Component level repair is not permitted on Factory Mutual 

approved equipment. It is mandatory to return the unit to Arlyn Scales for repair. 

8.

 

Removal of the battery is not allowed when the scale is located in a hazardous area. The indicator must be removed from its 

mounting bracket and taken to a safe area. Only then can the battery cover be removed and the battery recharged or 

replaced. 

9.

 

If using external power source to power the scale system, the power source must be rated for intrinsic safety and must 
comply with the entity parameters associated with this scale system. Alternatively, if the power source is through a safety 
barrier, the barrier must match the intrinsic safety parameters of the scale system. 

10.

 

To avoid the possibility of static buildup, the indicator housing must not be cleaned or rubbed down with a dry cloth while it is 
located in a hazardous area 

Содержание ArlynGuard S MKE-5-IS-SP






















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды