Arlyn Scales ArlynGuard S MKE-5-IS-SP Скачать руководство пользователя страница 12

Страница: 12 / 53

CONTROLS AND INDICATORS

Main Display Screen

The scale is equipped with 128x64 LCD Graphics Display with a wide viewing angle and variable contrast. For normal operations, you

have a choice of viewing weight information from two main screens. For parts counting scales, two more screens are available. You can

switch screens by pressing th

e MENU key and then press ENTER to accept the “Next Screen” menu choice. Doing this will step through

the screens shown below in order. For non-counting scales screens 3 and 4 are skipped.

WEIGHT DISPLAY

Shows the weight on the platform in the current units setting.

COUNT DISPLAY

Shows the current piece count on the platform. If there are any totals in the accumulate register it will indicate

“pcs acc”

UNITS

Shows the active conversion units.

NET INDICATOR

Shows “Net” if the

indicator is in net weighing mode.

STATUS/ZERO

Shows either “Zr” if the platform is at zero, a bar graph showing how close the scale is to maximum capacity or
“OVLD!” if the platform is overloaded.

TARE
DESCRIPTION

Shows the description of the active tare weight. If the tare was taken from the keyboard using the TARE key it will

show “From Keyboard”.

TARE WEIGHT

Shows the weight value of the active tare.

SAMPLE DESCR

Shows the description of the active sample weight. If the sample was taken from the keyboard using the SAMPLE

key it will show “From Keyboard”.

SAMPLE WEIGHT Shows the weight value of the active sample.

Front Panel / Keyboard

The front panel has a twelve button, click touch key panel that allows easy menu navigation as well as full text and floating-point entry.

The main scale functions are shown in black, menu navigation and floating point numeric entry keys are blue and the secondary

functions are yellow.

Содержание ArlynGuard S MKE-5-IS-SP






















































Результаты поиска

Содержание ArlynGuard S MKE-5-IS-SP

Отзывы:

Бренды по названию

Популярные бренды

Arlyn Scales ArlynGuard S MKE-5-IS-SP, Инструкция по эксплуатации

Результаты поиска

Содержание ArlynGuard S MKE-5-IS-SP

Отзывы:

Бренды по названию

Популярные бренды