Arkray Assure 530001, Справочное руководство

Страница: 9 / 52

3
SECTION
A
ASSURE® PRISM MULTI TEST STRIPS
The Assure Prism multi Blood Glucose Test Strips are for use with the Assure Prism multi Blood
Glucose Meter to quantitatively measure glucose in fresh capillary whole blood samples drawn
from the fingertips and alternative sites (forearm, palm, thigh and calf). Alternative site testing
should be used only during steady-state blood glucose conditions. The Assure Prism multi Blood
Glucose Monitoring System is intended for use outside the body (
in vitro diagnostic use) and
is intended for multiple-patient use in professional healthcare settings as an aid to monitor the
effectiveness of diabetes control. The system is only used with auto-disabling, single-use lancing
device. It is not intended for use on neonates and is not for the diagnosis or screening of diabetes.
Storage and Handling
• Store unused test strips only in their original bottle/box.
• Store test strips in a cool and dry place between 34 -86˚F (1-30˚C).
• Keep the test strips away from direct sunlight and heat.
• Do not freeze test strips.
• Close bottle cap tightly immediately after taking out a test strip.
• Use the test strip immediately after taking it out of the bottle/individual wrap.
• Handle test strips only with clean, dry hands.
• Do not bend, cut or alter the test strips in any way.
• Do not force a test strip into the meter. Gently push it into the meter’s test strip port.
• Apply only fresh capillary whole blood to the test strip.
• Use all of the test strips within the expiration date printed on the test strip bottle/box label.
• Do not use the expired test strips and dispose the expired test strips immediately because
using test strips past the expiration dates can produce incorrect test results.
• If the test strips are used and stored according to its storage and handling methods, test strips
in new, unopened bottle/boxes, test strips in bottle/boxes that have been opened can be used
until the expiration date printed on the test strip bottle/box label.
UNEXPECTED RESULTS
• Low or high blood glucose readings can indicate a potentially serious medical condition. If the blood
glucose reading is unusually low or high, or symptoms do not match the test result, repeat the test
using a new test strip.
• If the result is still not consistent with the symptoms observed or if blood glucose result is less
than 60 mg/dL or higher than 240 mg/dL consult your patients healthcare provider.
Contact Bars
Gently push the test strip, with its contact bars
facing up, into the test strip port of the meter.
Confirmation Window
Check here to see
whether sufficient blood
sample has been applied.
Edge to Obtain Blood Sample
Obtain blood sample here for testing by touching the
application tip at the end of the test strip to the blood
drop on finger.
Insert